Static Pressure Tips & Accessories
Date Added: 2020-01-07 00:21:05
Date Added: 2020-01-07 00:21:05
These sensors are for use with Manometers, Magnehelic® Gages, Pressure Switches and other Controllers to pick up or sense static pressure drop across air filters and cooling coils, blower input and discharge pressures, etc. The angled tips shown have 4" insertion depth. Each has four radially drilled .040" sensing holes. All except Model A-303 mount in 3/8" hole in duct. For portable use, a magnet holds No. A-303 in place. No. A-305 is used where a very low actuation or sensing point is required on a pressure switch or gage or where response time is critical. No. A-307 and A-308 are suitable for use in low velocity systems or where the need for accuracy is less critical.
| Model | Description |
|---|---|
| A-301 | Static pressure tip, for 1/4" metal tubing connection. |
| A-301-A | Static pressure tip, for 1/4" metal tubing connection with 6" insertion depth. |
| A-301-B | Static pressure tip, for 1/4" metal tubing connection with 8" insertion depth. |
| A-301-C | Static pressure tip, for 1/4" metal tubing connection with 12" insertion depth. |
| A-301-SS | Static pressure tip, for 1/4" metal tubing connection in stainless steel. |
| A-302 | Static pressure tip, for 3/16" and 1/8" ID plastic or rubber tubing. |
| A-302-A | Static pressure tip, for 3/16" and 1/8" ID plastic or rubber tubing with 6" insertion depth. |
| A-302F-A | 303 SS Static pressure tip with mounting flange, for 3/16" I.D. rubber or plastic tubing. 4" insertion depth, includes mounting screws |
| A-302F-B | 303 SS Static pressure tip with mounting flange, for 3/16" rubber or plastic tubing. 6" insertion depth, includes mounting screws |
| A-302F-C | 303 SS Static pressure tip with mounting flange, for 3/16" rubber or plastic tubing. 8" insertion depth, includes mounting screws |
| A-303 | Portable static pressure tip, for 3/16" ID rubber or plastic tubing with 4" insertion. |
| A-305 | Static pressure tip, low resistance application, furnished with two (2) hex jam nuts and two (2) mounting washers for duct mounting and with 1/8" NPT pipe thread for pressure connection. |
| A-305-SS | Static pressure tip, low resistance application, furnished with two (2) hex jam nuts and two (2) mounting washers for duct mounting and with 1/8" NPT pipe thread for pressure connection in stainless steel. |
| A-306 | Outdoor static pressure sensor, includes 50' vinyl tubing, mounting bracket and hardware. Red sensor. |
| A-306-A | Outdoor static pressure sensor, includes 50' vinyl tubing, mounting bracket and hardware. Gray sensor. |
| A-307 | Static pressure fitting, for 1/4" metal tubing connection. |
| A-307-SS | Static pressure fitting, for 1/4" metal tubing connection in stainless steel. |
| A-308 | Static pressure fitting, for 3/16" and 1/8" ID plastic or rubber tubing. |
| A-345 | Flange for mounting A-301, A-302, A-307, A-308 or 1/8" dia Pitot tubes with compression fitting when interior of duct is not accessible. Aluminum material. With gasket and sheet metal screws. |
| A-414 | 316 SS clean room pressure sensor. |
| A-417A | Static pressure pickup. For use in clean rooms, 60 micron filter picks up static pressure. Stainless steel wall plate fits 2" x 4" electrical box. Sealed with foam gasket, screws included. Barbed brass fitting holds 1/8" to 3/16" ID tubing. |
| A-418A | Static Pressure Pickup. Room mount with Delta Style plastic enclosure fits 2" x 4" electrical box. Fine mesh screen hides static pressure pickup port. Clean connection to 1/8" to 3/16" I.D. tubing and pressure sensor. Sealed with foam gasket, screws included. |
| A-418E | Static Pressure Pickup, European housing. Room mount with plastic enclosure fits 2" x 4" electrical box. Fine mesh screen hides static pressure pickup port. Clean connection to 1/8" to 3/16" ID tubing and pressure sensor. Sealed with foam gasket, screws included. |
| A-418N | Static Pressure Pickup, North American housing. Room mount with plastic enclosure fits 2" x 4" electrical box. Fine mesh screen hides static pressure pickup port. Clean connection to 1/8" to 3/16" ID tubing and pressure sensor. Sealed with foam gasket, screws included. |
| A-419A | Static pressure pickup ceiling mount. Plate rests on top of standard 3/4" thick ceiling tile while 60 micron filter faces down through 5/8"hole in tile. Filter is barely noticeable in room being monitored. Unit mounts to junction box. Barbed brass fitting holds 1/8" to 3/16" ID tubing. |
| A-420A | Static pressure pickup for roof or outside mount. Reduces effects of wind gusts to keep pressure readings stable when plate is parallel to ground. Structure withstands harsh environmental elements. Structure is 3-1/4" across and 2-3/8" deep. EMT Conduit fitting is 1/2". Pressure connection is brass barbed fitting for 1/8" and 3/16" ID tubing. |
| A-421 | Static pressure tip measures duct static air pressure, assembly includes 6" probe, silicon rubber hose and screws, built-in surge damper ensures stable readings, pressure spike reducer can be added to further smooth over pressure fluctuations. |
| A-465 | Flush mount space pressure sensor |
| A-480 | Plastic static pressure tip. |
| A-481 | Installer kit, (includes 2 static pressure tips and PVC tubing). |
| A-489 | 4" 303 SS straight static pressure tip with flange. |
| A-491 | 6" straight SS static pressure tip with mounting flange. |
| A-493 | 8" straight SS static pressure tip with mounting flange. |